Stainless Steel Pipe Fittings Plane Forging Blind Flange DN50 Sch160
Contact Supplier
Still deciding? Get samples of $ !
Request Sample
Product Highlights
- Fully manufactured to ASME B16.5 factory wrought butt weld fitting or socket weld standards.
- Standardized end bevel, radius and dimensional tolerances ensure perfect butt-weld alignment with seamless pipes (A106 Gr.B, A53 Gr.B, A179), eliminating assembly gaps and leakage risks.
- Smooth internal forming profile minimizes fluid turbulence and pressure drop, optimizing flow efficiency for steam, oil, gas and process mediums.
- Unified marking system (material grade, size, schedule, heat number) for full traceability per ASME pressure piping codes (B31.1, B31.3).
- Made from seamless pipe, hot forged plate or seamless blanks (no casting raw materials), with minimum 3:1 forging ratio to eliminate internal voids and inclusions.
- Full-range non-destructive testing available: UT, MT, RT and hydraulic pressure test to eliminate internal defects before delivery.
- Optional surface treatments (sandblasting, black anti-rust primer, varnish coating) enhance oxidation resistance during storage and field installation.
- Global universal grade recognized by all international engineering institutes, widely stocked and easily sourced worldwide for power plants, boiler workshops, oil & gas, chemical and water treatment p
- Complete fitting portfolio under one standard: long/short radius elbows, equal/reducing tees, concentric/eccentric reducers, pipe caps, crosses, offering one-stop piping matching.
- High dimensional stability, no permanent deformation under rated design pressure, lowering long-term leakage maintenance frequency.
Product Attributes
- Customization
- Available
- After-sales Service
- Immediately
- Warranty
- 24 Months
- Model NO.
- stainless steel flange
- Standard Scope
- ASTM ASME ANSI etc
- Application
- Construction, Repair, Oil Gas etc
- Surface
- Oil, Varnishing, Black Paint, Red Paint, Special Coat
- End of Fittings
- Sutt Welded, Socket Welded etc
- Flange Type of Connection
- RF, FF
- Transport Package
- by Wooden Case
- Specification
- 20cm x 6m x 20cm
- Trademark
- Permanent Steel Manufacturing Co., Ltd
- Origin
- China
- HS Code
- 7307910000
- Production Capacity
- 100000/ Week
- Package Gross Weight
- 10000.000kg
Shipping
- Shipping Cost:
- Contact the supplier about freight and estimated delivery time.
Online Trading Protection
- Payment Guarantee
-
Platform-protected payments with refund support for eligible order issues.
- Platform Logistics
- Clearer shipment tracking with platform-supported logistics.
- Inspection Service
- Optional pre-shipment inspection for quality and quantity checks.
- After-Sales & Dispute Handling
- Platform-assisted dispute resolution, including refunds or returns when applicable.
Only orders placed and paid through Made-in-China.com Secured Trading are eligible for payment protection and the corresponding platform services.
Product Images of Stainless Steel Pipe Fittings Plane Forging Blind Flange DN50 Sch160
-
Stainless Steel Pipe Fittings Plane Forging Blind Flange DN50 Sch160 -
Stainless Steel Pipe Fittings Plane Forging Blind Flange DN50 Sch160 -
Stainless Steel Pipe Fittings Plane Forging Blind Flange DN50 Sch160 -
Stainless Steel Pipe Fittings Plane Forging Blind Flange DN50 Sch160 -
Stainless Steel Pipe Fittings Plane Forging Blind Flange DN50 Sch160 -
Stainless Steel Pipe Fittings Plane Forging Blind Flange DN50 Sch160 -
Stainless Steel Pipe Fittings Plane Forging Blind Flange DN50 Sch160
Find Similar Products
Product Description
Product Description
Pipe Fittings
Types: Elbow
45°long or short radius elbow
90°long or short radius elbow
180° long or short radius elbow
45°long or short radius elbow
90°long or short radius elbow
180° long or short radius elbow
Seamless elbow: 1/2"-24" DN15-DN600.
Welded Elbow: 4"-72", DN150-DN1800.
Wall Thickness: sch10, sch20, sch30, std, sch40, sch60, xs, sch80, sch100, sch120, sch140, sch160, xxs, std, sch5s, sch20s, sch40s, sch80s.
Maximum thickness: 120mm
Product Range
Outside diameter 1/2"-72" DN150-DN1800.
Wall thickness 2mm - 120mm.
Bending radius R=1D - 10D.
Product angle 0 - 180.
Materials
Carbon steel: ASTM/ASME A234 WPB WPC.
Alloy steel: ASTM/ASME A234 WP 1-WP 12-WP 11-WP 22-WP 5-WP 91-WP 911.
Stainless steel: ASTM/ASME A403 WP 304-304L-304H-304LN-304N.
ASTM/ASME A403 WP 316-316L-316H-316LN-316N-316Ti.
ASTM/ASME A403 WP 321-321H ASTM/ASME A403 WP 347-347H.
Low-temperature steel: ASTM/ASME A402 WPL 3-WPL 6.
High performance: ASTM/ASME A860 WPHY 42-46-52-60-65-70.
Features
- Available with different connection ends
- Allow change in the direction of flow
- Rust proof finish
- Leak proof joint
- Suitable for pressurized applications
- Weather proof
- No buildup of debris over the time
- No buildup of debris over the time
Types: Flange
Weld Neck Flange
Slip On Flanges
Blind Flanges
Lap Joint Flanges
Socket Weld Flanges
Threaded Flanges
Forged Flanges
Weld Neck Flange
Slip On Flanges
Blind Flanges
Lap Joint Flanges
Socket Weld Flanges
Threaded Flanges
Forged Flanges
|
Pattern
|
Socket Weld , Slip On , Blind ,Screwed , Ring Joint,Weld Neck , Long Weld Neck , Reducing , Spectacle
|
|
|
size |
1/2"-60" (DN15-DN3000) |
|
|
Pressure class |
Class150-Class2500 |
|
|
Facing |
RF/ FM/ M/ T G/ RF / FF / RTJ |
|
|
Type |
WN SO SW TH BL RF FF MF RJT PL PJ/PR BL(S) |
|
| Material | Stainless steel: F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L Carbon Steel ASME / ASTM SA / A234 WPB, DIN 1.0405 |
|
Types: TEE
Reducer Tee
Equal Tee
Reducer Tee
Equal Tee
| Material | Stainless Steel ASME / ASTM SA / A403 SA / A 774 WP-S, WP-W, WP-WX, 304, 304L, 316, 316L, 304/304L, 316/316L, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404 |
| Dimension | ANSI B16.9, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2312, JIS B2313 |
| Thickness | Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc. |
| Size | 1/2"~80" |
| Material | Carbon Steel ASME / ASTM SA / A234 WPB, DIN 1.0405 |
| Dimension | ANSI B16.9, ANSI B16.28, JIS B2312, JIS B2313 |
| Thickness | Schedule 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS and etc. |
| Size | 1/2"~80" |
- Leak proof
- No buildup of debris over the time
- Suitable for pressurized applications
- Allow change in direction of flow
- Can sustain high temperature
- Dimensional stability
- Inert to all chemicals, acids and solvents
Types: Reducer
Eccentric Reducer
Concentric Reducer
Eccentric Reducer
Concentric Reducer
|
Pattern
|
Weld
|
Seamless
|
|
Size |
1/2"-48" (DN15-DN1200) |
1/2"-20" (DN15-DN500) |
|
WT |
2~1600mm |
2~50mm |
| Material | Carbon SA234 WPB, SA234 WPC,SA42 WPL6, SA42 WPL3, WP1. MSS-S WPHY,WPHY 46,WPHY 52,WPHY 56,WPHY 60,WPHY 65, WPHY 70 DIN 1629 St37, RST37.2 St52 |
|
| Standard | ASME/ANSI B16.9 Factory-Made wrought steel pipe fittings ASME B16.28 Wrought steel butt-welding short radius elbows and returns ASTM A234 Medium and high temperature used carbon and alloy steel pipe fittings MSS-SP75 Forging butt-welding fittings |
|
| DIN 2609 Steel butt-welding pipe fittings; technical delivery conditions DIN 2615 Steel butt-welding pipes fittings; tees with reduced pressure factor DIN 2615-2:Steel butt-welding pipe fittings; tees for use at full service pressure DIN 2987-P1Threaded steel pipe fittings crosses, tees, elbows BS 1640 Specification for steel butt-welding pipe fittings for the petroleum industry BS 1965 Butt welding pipe fittings for pressure purpose |
||
Features
- Leak proof
- No buildup of debris over the time
- Suitable for pressurized applications
- Allow change in direction of flow
- Can sustain high temperature
- Dimensional stability
- Inert to all chemicals, acids and solvents
Permanent Steel Manufacturing Co.,Ltd has been committed to being a major supplier of quality kinds of carbon steel pipe, stainless steel tube, hollow section, numerous types of piping equipments including Bend, Cap, Coupling, Elbow, Reducer, Stub End, Tee, Olet, Joint, Gasket, etc.
The Products from Permanent Steel Manufacturing Co.,Ltd are supplied in accordance with appropriate International Standards as well as Customer Specifications in a large variety of steel grades and dimensions.
Permanent Steel Manufacturing Co.,Ltd on a 250,000 m2 area and has three production units: Foundry, Rolling and Extrusion mills. Permanent Steel Manufacturing Co.,Ltd operates under strict quality, environmental, as well as health and safety management systems, in compliance with ISO 9001, ISO 14001 and OHSAS 18001 standards.
The Products from Permanent Steel Manufacturing Co.,Ltd are supplied in accordance with appropriate International Standards as well as Customer Specifications in a large variety of steel grades and dimensions.
Permanent Steel Manufacturing Co.,Ltd on a 250,000 m2 area and has three production units: Foundry, Rolling and Extrusion mills. Permanent Steel Manufacturing Co.,Ltd operates under strict quality, environmental, as well as health and safety management systems, in compliance with ISO 9001, ISO 14001 and OHSAS 18001 standards.
About the Supplier
This supplier has been audited by BV. Verify the report on the official BV website with ID "MIC-ASR2691365". Items marked "
" are certified.
){kind=link}
Company Profile
Permanent Steel Manufacturing Co., Ltd has been committed to being a major supplier of quality kinds of carbon steel pipe, stainless steel tube, hollow section, casing pipe, numerous types of piping equipments including Bend, Cap, Coupling, Elbow, Reducer, Stub End, Tee, Olet, Joint, Gasket, etc. As a factory, which specializing in the production, processing and sales of various steel pipes and pipe fittings size enterprises, headquartered in Hunan, the production base is located in Shandong and Tianjin.
Customized service
The Products from Permanent Steel Manufacturing Co., Ltd are supplied in accordance with appropriate International Standards as well as Customer Specifications in a large variety of steel grades and dimensions. Client specific requirements on execution, tolerances, lengths, mechanical and corrosion properties are offered on request.
Technical support
Permanent Steel Manufacturing Co., Ltd on a 250, 000 m2 area and has three production units: Foundry, Rolling and Extrusion mills. Permanent Steel Manufacturing Co., Ltd operates under strict quality, environmental, as well as health and safety management systems, in compliance with ISO 9001, ISO 14001 and OHSAS 18001 standards. The wide product range of Permanent Steel Manufacturing Co., Ltd meets the requirements of the Unified European standards (EN) as well as BS, DIN, ASTM, JIS standards, or any other specific customer request.
About Our Factory & Business Background
- Address
- 22nd Floor Golden Tower, Changsha West International Center Mansion, Yuelu District, Changsha, Hunan, China
- Terms of Payment
- T/T
- International Commercial Terms(Incoterms)
- FOB, EXW, CFR, CIF
- Average Lead Time
-
Peak Season Lead Time: within 15 workdays
Off Season Lead Time: one month - Nearest Port
- TIANJIN, SHANGHAI
Our Production Capability & Technical Expertise
Our Industry Experience & Global Business Record
- Export Year
- 2017-04-01
- Main Markets
- North America, Eastern Europe, Africa, Mid East, Western Europe
FAQ
- Are you trading company or manufacturer?
- We are a big manufacturer and supplier both in China.
- How long is your delivery time?
- Depends on pipes size and quantity. 7-10 days for stocked steel pipe and 20-40 days for new productions according to your requests and grade .
- How is the quality level of products ?
- Our all the fittings and flanges products are the best in this market , not only we can support you to have a full set of production quality control documents and certification etc but we can help you do inspection certificate records, including 3.1 or 3.2.etc
- Can you assist to do CIF or DAP ?
- Yes, sure, we have our own shipping deparment and we can assist you booking the faster shipping space and train or by air needs etc.
- Is it possible to provide a one-stop service?
- Yes, we definitely can provide this ,we are one of the biggest steel group companies, and we hold our product bases in China including all kind of fittings and flanges etc accessories .
- Whats your payment term ?
- We can support you in TT , LC , DP , DA , Cheque , etc
- Can you provide sample ? Do you support OEM ?
- Yes. we have produce lines can support to do OEM any needs or take any drawings to manufacturing and supplying.
- Are there any fittings could be do special coating for external or internal?
- Yes, we can support you in any special caoting such as epoxy , fire-protectant paint , FBE, galvanized (zinc )etc
Send your message to this supplier
People who viewed this also viewed
-
US$555.00-700.00 / Ton
-
US$215.00-485.00 / Ton
-
US$200.00-500.00 / Ton
-
US$200.00-507.00 / Ton
-
US$555.00-700.00 / Ton
-
US$200.00-507.00 / Ton
-
US$200.00-507.00 / Ton
-
US$200.00-507.00 / Ton
-
US$800.00-1,200.00 / Ton
-
US$20.00-100.00 / Piece
Find Similar Products By Category
- Supplier Homepage
- Products
- Pipe Fittings
- Others Pipe Fittings
- Stainless Steel Pipe Fittings Plane Forging Blind Flange DN50 Sch160
Related Categories
Hot Searches
- China Spacer Factories
- Pipe Joint Factories
- Construction Projects
- Rubber Joint Factories
- Elbow Flange
- Tee Flange
- Flange Joint Elbow
- Equal Flange
- Flange Nipple
- Top 10 Spacer
- Flange Bulkbuy