Butt Welding Steel Fittings B366 Alloy C-4 Uns No6455 Seamless Reducer Fittings

Product Description

Product Description:

Specification: 
1.Flange:
Types of Flanges

Threaded flange

Weldneck flange

Slipon flange

Blind flange

Socket Weld flange

Lap Joint flange

Ring Joint flange

Oriface flange

Long Weldneck flange

Deck Flange flange

RTJ Flange

Specification	ASTM / ASME A105, ASTM / ASME A182
Grade	F1 / F5 / F9 / F11 / F22 / F91 etc.
Dimension	ANSI/ASME B16.5, B 16.47 Series A & B, EN-1092, BS4504, BS 10, B16.48, DIN, etc.
Standard	ASME Flanges, ANSI Flanges, DIN Flanges, BS Flanges, EN Flanges, etc
Class	150#, 300#, 600#, 900#, 1500# & 2500#

Specifications

ASTM / ASME A105 

ASTM A182 / ASME SA182
Standard
ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc.
Size
1/2″NB TO 60″NB
SS Flanges
Class
150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Type
Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ)
Dimension Standard
ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings

2.Elbows:

Specifications
Seamless elbow: 1/2"-24" DN15-DN600.
Welded Elbow: 4"-72", DN150-DN1800.
Wall Thickness: sch10, sch20, sch30, std, sch40, sch60, xs, sch80, sch100, sch120, sch140, sch160, xxs, std, sch5s, sch20s, sch40s, sch80s.

Maximum thickness: 120mm.

Product Range
Outside diameter 1/2"-72" DN150-DN1800.
Wall thickness 2mm - 120mm.
Bending radius R=1D - 10D.

Product angle 0 - 180.

Materials
Carbon steel: ASTM/ASME A234 WPB WPC.
Alloy steel: ASTM/ASME A234 WP 1-WP 12-WP 11-WP 22-WP 5-WP 91-WP 911.
Stainless steel: ASTM/ASME A403 WP 304-304L-304H-304LN-304N.
ASTM/ASME A403 WP 316-316L-316H-316LN-316N-316Ti.
ASTM/ASME A403 WP 321-321H ASTM/ASME A403 WP 347-347H.
Low-temperature steel: ASTM/ASME A402 WPL 3-WPL 6.
High performance: ASTM/ASME A860 WPHY 42-46-52-60-65-70.
 

3.Tee:

Pattern	Weld	Seamless
Nominal size	1/2"-48"  (DN15-DN1200)	1/2"-20"  (DN15-DN500)
Wall thickness	2~100mm	2~50mm
Bend radius	SCH5S-SCH160 ,XXS	SCH5-SCH160

TEE 
-tee-reduce
-calss-2000-tee-stright-scoket-weld
-calss-3000-tee-stright-scoket-weld
-calss-6000-tee-stright-scoket-weld 
-calss-9000-tee-stright-scoket-weld 
-
-tee-stright-equal
-calss-2000-tee-reduce-thread
-calss-3000-tee-reduce-thread
-calss-6000-tee-reduce-thread 

4.Reducer:

Pattern	Weld	Seamless
Size	1/2"-48"  (DN15-DN1200)	1/2"-20"  (DN15-DN500)
WT	2~1600mm	2~50mm

Material

Carbon SA234 WPB, SA234 WPC,SA42 WPL6, SA42 WPL3, WP1. MSS-S
WPHY,WPHY 46,WPHY 52,WPHY 56,WPHY 60,WPHY 65, WPHY 70
DIN 1629 St37, RST37.2 St52
Standard
ASTM 
ASME/ANSI B16.9 Factory-Made wrought steel pipe fittings
ASME B16.28 Wrought steel butt-welding short radius elbows and returns
ASTM A234 Medium and high temperature used carbon and alloy steel pipe fittings
MSS-SP75 Forging butt-welding fittings

JIS JIS B 2302:1998Screwed type steel pipe fittings
JIS B2311 Universal steel butt-welding pipe fittings
JIS B2312 Steel butt-welding pipe fittings
JIS B2313 Steel plate butt-welding pipe fittings
JIS B 2321:1995Aluminium and aluminium alloy butt-welding pipe fittings
EURO 
DIN 2609 Steel butt-welding pipe fittings; technical delivery conditions
DIN 2615 Steel butt-welding pipes fittings; tees with reduced pressure factor 
DIN 2615-2:Steel butt-welding pipe fittings; tees for use at full service pressure 
DIN 2987-P1Threaded steel pipe fittings crosses, tees, elbows
BS 1640 Specification for steel butt-welding pipe fittings for the petroleum industry
BS 1965 Butt welding pipe fittings for pressure purpose

5.Gasket,weldolet,cap,Valve,Swage,Nipple,Grooved fittings etc... :
 

Value-added services
BEVELING
Beveling Stainless Steel tubes contain one end angled,  so that it mates with a complementary tube end. Tubes can be beveled for certain applications in order to make welding of stainless steel tubes easier, which saves weld prep time and money compared to hand cutting.

HEAT TREATING & ANNEALING
Permanent Steel can heat treat some 400 series stainless steel seamless tube. Heat treating realizes stress as a result of hardening, depending upon the chemistry of the metal being treated. Heat treating is also used for tempering, quenching, normalizing, and solution annealing.

HONING & TURNING
During the honing/turning process, an abrasive rotating tool removes metal from the interior surface of a cylinder, pipe, or tube. The main purpose of honing is to finish the surface to a particular diameter and/or desired cylindrical geometric design. Honing is typically a secondary machining operation that completes a produce/part,  relieves stress created during production, or corrects features of the finished product. A typical production cycle is to drill, ream, heat treat, then hone.

POLISHING
POSITIVE MATERIAL IDENTIFICATION (PMI)
In some cases, it may be necessary to complete additional positive material identification testing. Permanent Steel can complete this testing in house or we can work with an independent laboratory to complete the testing. Please contact us for specific requirements.

UT TESTING
Ultrasonic Testing (UT) utilizes sound energy at high frequencies, in order to provide examinations and measurements of the stainless steel product. This aids in flaw detection/evaluation, dimensional measurements, etc.

6:Stainless steel fittings:

Flange, elbow,tee,reducer,cap,weldolet,bend,socket etc..

PMC Latest fittings order:








Application:



About us:

1.Pipe and fittings:
Permanent Steel Manufacturing Co.,Ltd has been committed to being a major supplier of quality kinds of carbon steel pipe, stainless steel tube, hollow section numerous types of piping equipments including Bend, Cap, Coupling, Elbow, Reducer, Stub End, Tee, Olet, Joint, Gasket, etc. 

The Products from Permanent Steel Manufacturing Co.,Ltd are supplied in accordance with appropriate International Standards as well as Customer Specifications in a large variety of steel grades and dimensions. Permanent Steel Manufacturing Co.,Ltd on a 250,000 m2 area and has three production units: Foundry, Rolling and Extrusion mills. Permanent Steel Manufacturing Co.,Ltd operates under strict quality, environmental, as well as health and safety management systems, in compliance with ISO 9001, ISO 14001 and OHSAS 18001 standards.  We have six spiral pipe production lines have introduced into the international advanced technique design andmanufacturing,each of them is outfitted with the whole set equipment from uncoiling to pipeindpection,packing and then Ex-work,includingun coiler, leve ling ma chine , fly welding machine ,plasma cutting machine,pipe endgrinding machine.hydrostatic testing machine,beveling machine,end expander, ultrasonic inspector for pipe body and weld seam,highlyclear X-ray image inspection system and so on.

Fittings Equipment:

2.Coating:
We have two advanced three-layer PE anticorrosive pipe production lines, which can carry out three-layer PE and FBE anticorrosion for steel pipe with diameter of 20mm to 1820mm, as
well as epoxy asphalt anticorrosion production line, steel-plastic composite pipe production line, internal and external plastic coating and plasticlining production line, and cement mortar production line for inner wall of steel pipe. The annual anticorrosion production capacity reaches 18 million square meters.  Since its establishment, the company has formed a good cooperative relationship with many domestic and foreign steel pipe manufacturers, gas companies and oil companies, and its sales network covers many countries.  


Our Certificate:

End Users:

Our team:


Our advantage:
1. Full projects reference all of the world and vendor references from the most main oil and Gas in stitute, companies, investors
2. The inspection program is full supported to the docs requirements
3. The list of producing equipment and inspection equipment will be provided
4. The relative shipping docs, third party inspection report, Mill test certification, custom appreciate letters
5. The mill certification such as API monogram , ISO ect....
7. ITP, MPS & ISO manual
8. Prices competitively level
9. Full presentation experiences and guidance
10. Engineering design & construction capacities
11. Financial supports, various of payment term could be acceptable such as L/C, T/T.
12. Free custom inspection corporation & checked corporation in CCPIT
13. Full bank supported company with a perfect line of Credit "AAAAA"
       ect
 

FAQ

 

Q: How long is your delivery time? 

A: Depends on pipes size and quantity. 7-10 days for stocked steel pipe and 20-40 days for new productions according to quantity.bowl shape stainless steel smoking pipe screens

Q: Do you provide samples? Is it free or extra? 201 Stainless Steel Pipe used for Food and Chemical Industry
A: Yes,we could offer free steel pipe sample for your evaluation. stainless steel pipe fitting

Q: What is your terms of payment? steel pipe

A:  TT payment way, TT+LC, or  100%  sight LC and usance L/C for 30-120days,the specific payment should be addressed by further discussion.